Round Ceiling Diffuser

Round Ceiling Diffuser

Round Ceiling Diffuser is a type of ceiling diffusers that is mostly used to supply clean room air, hospitals, pharmaceutical industry, etc. This product, is used for spaces with a ceiling height of 4 meters and a room temperature of -10 to +10 degrees Celsius for air flow, return and air discharge.

The special design and shape of the vanes in the Round Ceiling Diffuser has caused the incoming air to rotate in the ventilated space. It should also be noted that the air output of these diffusers is homogeneous and spreads 360 degrees in the environment like flat and raised valves.

The Round Ceiling Diffuser is often made of aluminum or stainless steel and without a damper behind the valve and with a filter box or plenum behind the air register with a depth greater than the plenum boxes of normal air registers and in different types of electrostatic powder colors (in the aluminum type) is produced

In environments where there are no suspended particles and high-flow air distribution is required, the Round Ceiling Diffuser distributes the air in a rotating manner with the help of its special vanes and makes the temperature of the incoming air and the room temperature uniform.

Hospitals, pharmaceutical space and laboratories are among the environments where there should not be any suspended particles in the air; Because by spreading particles in the ambient air, serious problems such as infection or disruption in the laboratory system may occur. Therefore, in order to have a powerful and desirable air conditioning system, these sensitive environments require Round Ceiling Diffuser that have a high air suction power.
Round Diffusers with movable vanes (vortex valve with movable vanes) were one of the most widely used types of diffusers in clean room spaces until about 5 years ago.

The material and size of the Round Ceiling Diffuser

This product is made of galvanized sheet and aluminum. The sheet thickness of these types of diffusers is from 1 to one and a half aluminum or galvanized sheets.

Standard sizes are defined for this product and are selected and used according to ventilation.

The standard sizes are 30 x 30, 40 x 40 and 60 x 60. After cutting this product by CNC machine, the desired grooves are created on the sheet and the black vanes that guide the wind and air flow in two directions are placed on this product.

Depending on the dimensions of the Round Diffuser , the vanes can be changed and it can be used together with plenum box and filter box. The distinctive aspect of this type of valve for measurement compared to other valves is that the sizes are standard and the channel opening is designed and made with a specific definition, and the manufacturer can mass produce and store this product.

Features of the solar valve

• The ability to install on all types of false ceiling models, including Tilly Armstrong or Kenaf ceilings
• The ability to install the necessary support accessories on the plenum box behind the air register
• Installation of various filters (HEPA, activated carbon, aluminum, etc.) in the plenum box for these diffusers

Advantages of Round Ceiling Diffuser

1. Due to its low power level, it is suitable for calm and quiet places.
2. The valve blades are fixed.
3. Round Diffuser can be connected horizontally and vertically to the channel.
4. It has a launch length, suitable speed and high flow capacity.
5. The blades in it are self-supporting.